How to Use a Reciprocating Saw?

0
3

One of the most versatile saws you can own is the reciprocating saws. With the correct blade attached, these strong hand saws can cut nearly any kind of material. They are the perfect sidekick for demolition job for electricians, plumbers, and building contractors. It requires a little bit of getting used to mastering the operation of this energy saw, but once you know how to use a reciprocal saw, you will feel completely comfortable using it in all your DIY projects.

However, since you are using a saw by hand, learning properly how to use a reciprocating saw will help make your cutting faster, with less collateral damage to the surrounding area. Although not as hazardous as using the table saw, it is essential to use this demo tool securely. And the more you know, the better you’re going to be able to stay secure.

1. Match the blade to the material

You need to match the blade to the material to be sliced before you can start using your reciprocating saw. You can use an all-purpose reciprocal saw blade for certain cuts. These general blades work on a variety of surfaces, but they rarely stand out on anyone. Once you learn how to use your reciprocating saw, you’ll want to spend for the stuff you’re cutting in the correct saw blade.

For example, if you remove a tile wall, using this Sawzall could be one of your options to just cut right through it. Your type of blade depends on whether you cut through metal, drywall, wood, or plastic. Metal projects require a blade that is more durable than a drywall blade. For heavy-duty metals or plastics, you may need a carbide-tipped blade.

2. Secure the blade firmly into the chuck

Once you’ve determined what kind of blade you need to insert into the chuck for your reciprocating saw. Most reciprocal saws have a mechanism of twisting and pushing, similar to a jigsaw, which allows you to insert the blade and lock it. This simple process only adds to why having a unique blade for every type of material you cut is so much better–it’s incredibly simple and fast to change the blade out.

This twist and push mechanism is the same way by twisting it in the opposite direction and pulling it out of the chuck you remove the blade from your reciprocating saw. Whether you insert a fresh blade or remove an ancient, sluggish blade, you need to make sure that the blade is off and unplugged.

When you have finished inserting a fresh blade, be sure to double-check that it is in location properly and safely before you start using it for cutting. To make sure it’s safe and tight, you should give the blade a good tug. Failure to properly secure the blade could cause material damage as well as unsafe operation for you.

​3. Size Up Your Cuts

Typically, you will use a reciprocal saw for a demolition job, such as cutting a hole for repair or construction in a wall, and precision is not the most significant consideration to consider. It is important, however, to plan where you are going to cut before turning the saw on.

Once the saw goes on, it can really start to accelerate through its cuts, and if you don’t have a good idea where you want to cut, you may end up making a problem error. You may not have to go as far as marking your cuts in advance. But if you need a certain level of accuracy, it can’t hurt to grab a pen and label a line for your cutting.

​4. Think Before You Cut

Before you cut, you need to consider all the factors of your cut before you jump into cutting with your reciprocating saw. As stated above, the reciprocating saw tends to have its own mind once you begin cutting. You need to make sure that your material is ready for cutting, which means that before cutting you want all the nails, staples and any other obstructions removed.

Related: Jigsaw vs Sabre Saw: Which is Better one?

You need to think about electrical wiring and plumbing in demolition projects, while other surfaces may present hidden difficulties as well. These are sometimes sitting behind or below the stuff you cut, so it can be difficult to define them.

Before you start cutting with your recipe saw, make sure you don’t have any hidden surprises that could be damaged with the blade on the surface and area you plan to cut. You may want to switch to a nice jigsaw if you need to create some cuts with a greater degree of precision. These saws are much more accurate than they were seen by the reci.

5. Adjust the variable speed

Typically, the variable speed control of your reciprocating saw will be similar to a jigsaw. This is a good way to get used to when you start using your saw. The variable velocity will assist you to regulate your cut. Start cutting at a low velocity so you can precisely line up the saw and get the method hanging. You can easily increase the variable speed as you progress and feel more comfortable using the demo saw. This will cut through the material quicker and create more progress. You will need to adjust your variable speed as you cut to ensure that the material you cut is not damaged.

In addition, cutting at a slower speed will generally result in a cleaner cut. Using a high variable speed will be too fast from back and forth blade movement as you start cutting, and you will find the reci saw unmanageable. You won’t have as much control over the cut line as you do, and you need to make sure that your cut line starts accurately. Start slow and speed up the variable when you think you need more velocity and still can control the demolition sight as it cuts.

6. Use the Shoe to Your Advantage

Your saw’s shoe is there to guide you and give you more control when you cut. The shoe is at the base of your blade and the surface you are cutting should be pushed. This will give you some support as you cut the saw and make it easier and better to manage the cut precision.

If you don’t use the shoe, the reciprocal saw can sway back and forth as you cut, making control almost impossible. Use the shoe liberally by pushing it against the fabric you cut with light force. Keep it tight on your cutting surface and find that you can cut as accurately as you need.

7. Check Your Blade

We’ve discussed this several times now–this saw’s beauty, as well as its difficulty, is that it tends to fall off once you go. It may be time to substitute the blade if you discover that you are doing most of the job, rather than the saw. You can readily dull your reciprocal saw blade, particularly if you use it to cut difficult materials that require a lot of energy and strength.

Remember when cutting the saw blade should do most of the work. You’re there to assist as you cut it and provide it with assistance and guidance. Whenever you feel you put too much work into your cut, change the blade with a new one and see if that makes any difference to the way you cut. It is supposed to cut quicker, cleaner, and simpler.

Conclusion

It doesn’t have to be hard to use a demolition saw if you follow these directions How to Use a Reciprocating Saw. You will discover that in a wide range of apps your saw has used. The easier it will be for you to regulate and cut with the more you use the saw. It is the perfect tool for work on demolition and fast, large cuts.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.