Worm drive saws share the market with normal circular saws on the sidewinder. The two are produced for distinct duties, though similar in building and appearance. Sidewinders are available for light and fast work, while models of worm drive can be used for more severe projects.
There are many things to consider in picking up the best worm drive saws, such as build quality, engine quality, torque, maximum cutting depth, bevel angle capability, housing material, how simple it is to modify a worn blade, and more.
Best Worm Drive Saws – Reviewed
Read on for reviews of some of my best worm drive saws and a comprehensive guide on what to look for and how to select the correct saw.
Bosch 7-1/4-Inch Worm Drive Circular Saw CSW41
The Bosch CSW41 is fitted with a strong, well-made engine running at a variable of up to 5,300 rpm. The engine remains on the cooler side even after extended use thanks to the well-designed lightweight magnesium housing. To further decrease the saw’s weight, the footplate is produced of die-cast magnesium. One of the heavier 7-1/4 “worm drive saws out there is the 13.2lbs CSW41.
The blade that comes with it is a 7-1/4 “normal blade with a maximum 2-3/8” cutting depth. It is possible to adjust the real cutting depth on one of several set rates. The saw also has a helpful bevel ability of53-degree with a favorable 45-degree stop. The blade can cut smoothly through almost any kind of wood thanks to the anti-snag guard on the reduced side.
With decking, bridge building, and framing among its strongest suits, this competent saw can be used for a broad variety of projects. This low-maintenance saw has an integrated multifunctional wrench to replace the blade, engine brushes, and oil.
DEWALT DWS535 7 1/4-Inch Worm Drive Circular Saw
While some of the worm drive saws can only be used for tiny home projects, a building site’s DeWalt DWS535 is strong enough. Its lightweight construction is extremely sturdy. Magnesium is difficult and light housing. The die-cast magnesium footplate further helps to decrease the saw’s weight. The DWS535 weighs about 13.8lbs in total.
The engine behind this DeWalt is running at 4,800 rpm, slightly smaller than some likewise priced models, but that’s because it’s intended to produce a wonderful torque. The engine has a nice cooling system that allows it to run for hours thanks to the cleverly constructed housing.
The DWS535 comes with a normal 7-1/4 “blade with carbide tips. The maximum cutting depth at an angle of 45 degrees is 2-7/8 “or 1-7/8.” The highest angle is 53 degrees and the stops are set at 22.5 and 45 degrees. Changing blades needs the spindle lock that is included.
Makita 5477NB 7-1/4″ Hypoid Saw
Hypoid gears ensure an almost maintenance-free sawing experience, but how do they add to the velocity and torque of the blade? Thanks to its 15-amp engine with ball bearing building, the Makita 5477NB offers both in abundance. Designed for a variety of uses, the 5477NB stands out as framing, construction, carpentry, OSB, LVL, PSL, and plywood saw.
The Makita 5477NB saw features an oil bath technology sealed hypoid gearbox that keeps bearings continuously lubricated. This implies much less maintenance is involved. It ships with a framing blade of 7 1/4-inch with carbide-tipped teeth capable of chewing like butter through nail-ridden wood. Such a blade can heat up fairly fast, which is why Makita carefully adds heat vents to assist dissipate heat and efficiency.
The 5477NB has a maximum no-load velocity of 4,500 RPM, decent according to any standard, and a cutting capacity of 2 3/8 inches at 90 degrees, 1 9/16 inches at 50 degrees, and 1 3/4 inches at 45 degrees. With a weight of just over 14 pounds, a big ergonomic rubberized grip and quick-access spindle locks and blade wrench buttons for easier blade modifications make the saw easier to manage.
Hitachi C7WDM 7 1/4″ 15-Amp Worm Drive Circular Saw
Power and effectiveness trump looks and convenience for the heavy-duty job. That’s what the solid Hitachi C7WDM worm drive saw behind the philosophy. It comes with a strong, well-made metal housing, a strong 15-amp engine, and a robust blade. It weighs nearly 15lbs, putting it out there among the stronger worm drive saws. A standard 7-1/4 “steel blade with 24 carbide-tipped teeth comes with this powerful saw.
It provides a 2-3/8 peak cutting depth. The cutting depth at an angle of 45 degrees is a respectable 1-7/8.’ The rough building makes it on a building site a nice partner. The C7WDM also includes controls on steel bevel and level adjustment. To alter the blade, you only need a wrench. This saw can manage more challenging and heavier duties.
SKILSAW SPT77WML-01 15-Amp 7-1/4-Inch Lightweight Worm Drive Circular Saw
A lighter saw can sometimes be a better fit as it is easier to maneuver and hold steadily. When the attribute you are looking for is lightness, you can’t do much better than the circular saw of the 11-pound Skillsaw SPT77WML-01 worm drive. The magnesium-built saw is equipped with a dual-field 15-amp engine with a 5,300 RPM no-load blade speed— significantly faster than many of the options at this price point.
The powerful engine is designed for relatively heavy tasks, so even with heavy usage, it remains cool. The SPT77WML-01 also features a ready-to-use depth adjustment level that allows you to make quick switches between 1/4 ply cuts, 1/2 ply cuts, 3/4 ply cuts, and 2x ply cut. This makes it highly recommended to cut without snagging through thinner materials.
The saw is superbly balanced and has a soft rubber grip that dramatically improves ergonomics. The saw allows you to make a wider range of cuts thanks to its 53-degree bevel, making it the perfect all-in-one circular saw for many projects.
What’s the best worm drive saws you’ve seen? The Hitachi C7WDM Worm Drive Circular Saw is by far the highest choice with regard to raw value and quality. Great construction quality, a high torque motor with a 5,000 RPM rating, and hard material quality make it one of the most strong and durable circular worm drive saws you will find anywhere.
The saw is a little heavy, but very stable as well. It’s the only saw in this list that comes with two additional blades— something you’re shopping for substitute blades the next time you’re shopping.
Related: Best Tile Saw Blade Reviews